Framed Print > Peter Butt Transport Collection
Framed Print : NRC tailless research glider
Framed Photos from Mary Evans Picture Library
NRC tailless research glider
NRC tailless research glider from the National Research Council in Canada (sometimes referred to as Pterodactyl VIII, referring to its lineage from Prof. Hills pre-war Pterodactyls). The project was originally proposed by Professor G.T.R.Hill, of Pterodactyl fame, and Hill made the preliminary studies. Detail design was by NRC staff, under the leadership of G.S.Levy and Thor Stephenson. Professor Hill was British Scientific Liaison Officer to the NRC at the time.The aircraft was originally to be a 1-3 scale powered model, but evolved into a full-size glider.Construction was of wood, but the wing surface was covered in a laminated plastic layer, to give a smooth surface.The wing was fitted with rotating tip sections, for trimming purposes, and tip mounted fins and rudders. Two sets were constructed, one with a symmetrical section, the other with a cambered section. Control was via elevons, and split flaps were fitted, hydraulically operated. The tricycle undercarriage was retractable and fitted with brakes.The glider was first flown by the famous Austrian sailplane pilot, Robert Kronfeld in the summer of 1946. After 30 hours flying, the aircraft was modified; the one piece canopies were replaced with fixed windscreens and sliding canopies, the main wheels were moved aft, to correct the centre of gravity, and retactable skids, to prevent a nose over during a wheels-up landing, were fitted in bulges under the wing leading edge.Flying behaviour was considered good, although there were problems with flow separation around the separate canopies.The major problem was that only 20% of a flight was considered useful testing time, along with the fact that a tug and crew were also needed.After the test program ended, the glider was abandoned in the open, deteriorating until finally broken up in the mid 1950s. Date: circa 1948
Media ID 21131973
© The Peter Butt Aviation Collection / Mary Evans Picture Library
1948 Council Fame Glider Hills Lineage Originally Pre War Prof Professor Project Proposed Pterodactyl Referred Referring Research Tailless Viii
18"x14" Modern Frame
16x12 Print in an MDF Wooden Frame with 180 gsm Satin Finish Paper. Glazed using shatter proof thin plexiglass. Frame thickness is 1 inch and depth 0.75 inch. Fluted cardboard backing held with clips. Supplied ready to hang with sawtooth hanger and rubber bumpers. Spot clean with a damp cloth. Packaged foam wrapped in a card.
Contemporary Framed and Mounted Prints - Professionally Made and Ready to Hang
Estimated Image Size (if not cropped) is 40.6cm x 35.6cm (16" x 14")
Estimated Product Size is 45.7cm x 35.6cm (18" x 14")
These are individually made so all sizes are approximate
Artwork printed orientated as per the preview above, with landscape (horizontal) orientation to match the source image.
MADE IN THE USA
Safe Shipping with 30 Day Money Back Guarantee
FREE PERSONALISATION*
We are proud to offer a range of customisation features including Personalised Captions, Color Filters and Picture Zoom Tools
FREE COLORIZATION SERVICE
You can choose advanced AI Colorization for this picture at no extra charge!
SECURE PAYMENTS
We happily accept a wide range of payment options so you can pay for the things you need in the way that is most convenient for you
* Options may vary by product and licensing agreement. Zoomed Pictures can be adjusted in the Cart.
